Sling and New Front Sight on Cabela's Hawken

One rifle I've been shooting lately is my Cabela's Hawken, made in Italy by Investarms. At some point I'd like to take it hunting, which IMNSHO requires a sling. Being a more modern design than, say, my long rifle, I didn't mind mounting modern quick detach swivels.

I found this set by GroveTec at MidwayUSA which fit. I paired it with this Hunter carry strap. Installing the rear swivel required drilling a hole in the stock. The front swivel clamps around the lower ramrod pipe. Before installing it, I Loc-Tited the screw securing the pipe since I noticed it was loose already. I also Loc-Tited the Chicago screw holding the strap to the rear swivel. In my experience, thread locker prevents a lot of problems. I even put some on the inside of the part of the front swivel where it clamps over the ramrod pipe.

The other addition I made was to replace the Williams fiber optic front sight with a Lyman 37ML white bead from October Country. The dovetail for the front sight is .360" instead of 3/8" (.375"), which is more common in the US. The Williams sight never fit the dovetail that well and wasn't as secure as I'd like.

The Lyman front sight wasn't as good a fit as I wanted, either. I wound up dimpling the bottom of the dovetail recess to raise some metal and shimming it with a small piece of 600 grit wet/dry sandpaper. After the sight was in I staked the dovetail as well.

The new sight is a little shorter than the Williams it replaced, so I'll have to rezero the rifle. No biggie.

October Country Universal Sling

Earlier this week, I ordered a Universal Sling from October Country, who caters to black powder shooters. I wanted a sling for my Cimarron 1873 Sporting Rifle that would be more secure than the Leatherman sling I used when I hunted with the rifle last month. (The Leatherman sling is extremely well made but the butt cuff doesn't fit the 1873 snugly and the only way to tighten it is with a cord or rubber band. I'll reserve it for my flintlock.)

OC's sling can be ordered for left or right handed shooters with the difference being which side of the butt stock the lacing is on. As a southpaw, I ordered a lefty sling.

It's primarily intended for muzzleloaders but as you can see below, it fits lever actions just fine.

It wraps around the barrel as shown below. There are two holes pre-punched in the strap so you can adjust it. I moved the lacing to tighten it up on my rifle.

The butt cuff has a slot for the strap in lieu of a swivel. Again, there are two pre-punched holes in the strap down below, allowing you some length adjustment without making modifications.

They also offer a two-tone version but I prefer the looks of the all-brown one.

I'm very impressed with the quality. All parts are made from good, thick leather, including the laces. This will make the rifle very nice to carry afield. For $28 and change it's a great deal. I'm tempted to order one for my 1860 Henry because the rear sling swivel popped off it again. On the Henry, I'd use the lacing to attach it to the front sling loop so that it doesn't interfere with the magazine follower.

Aside from the sling, I also ordered a couple French amber flints to try in my long rifle, a primitive forged turn screw to keep in my shooting pouch, and a Lyman 37ML front sight to put on my Cabela's Hawken.

I was also very pleased with October Country's service. A few minutes after I ordered I got a phone call from them asking if I'd changed my address. Apparently, there's another Dave Markowitz who had ordered from them. (I explained that was the evil one. ;) ) My ordered was placed Wednesday and it arrived here via USPS 2-day Priority Mail on Friday.