Shoulder Strap for the CZ82 Holster

Today I added a shoulder strap to the holster so I can wear it that way. The strap was from a MidwayUSA magazine storage pouch and has spring clips on the ends. To make attachment points on the holster I added a couple of zip ties.

It contains the gun, spare magazine, cleaning rod, and a Ballistol wipe which can be cut down into cleaning patches if needed. The idea behind this is that if this was all I could grab in a hurry or if I'm traveling light I'd still have the bare minimum to maintain the gun for awhile in the field.

I might add a loop or strap to the bottom so I can then secure it to my belt while wearing it like a tanker holster. This would keep it in place while drawing the gun. (I want the shoulder strap because wearing a rig like this on my belt would drag down my pants due to my lack of a butt, unless I wear suspenders.)

CZ-82 Military Flap Holster

Yesterday I received the Czech military suplus flap holster that I ordered from an eBay seller for the CZ-82 I picked up two Fridays ago. Like many older European military holsters, it's basically a gun case with belt loops. Unlike every other Euro flap holster, it's ambidextrous and doesn't look like a holster for a pistol. You could probably wear this on a trail where you're likely to encounter earthy-crunchy types and they'd be unaware you're armed.

The holster I got had some sports on it from either water or mildew. I gave it a rubdown with Ballistol to neutralize any mildew and further protect the leather. It's stamped 1989 on the inside, making it one year younger than my CZ-82.

The holster is well made of good quality leather with nice stitching.

With the flap open you can see how it accomodates the gun and a spare magazine. There is a sleeve on either side for a cleaning rod. I'm expecting one in the mail shortly.

The back has belt loops. This shows the stiching for the interior compartments that hold the muzzle end of the gun and the spare magazine. One could put a small oil bottle in between. I may put a small Ziplock back with a few patches wet with Ballistol in that space.

The Falco holster that came with the gun holds my Beretta 81 Cheetah perfectly, but this one won't accept the Cheetah. The Beretta's slide and dust cover are too tall near the muzzle. I'd expect a Makarov to fit fine.

However, the Czech holster does accept my Beretta 71 Jaguar .22 along with two spare magazines.

Now, this obviously is not something we'd want to use for normal CCW around town. However, I could see this being useful if you're carrying out in the wilderness where you want to protect the gun against the environment. That you can carry the gun, a reload, and basic cleaning gear in it is a nice bonus.

Tanker Holsters for Single Action Carry

I gave this setup a try to see how comfortable it would be for woods carry, although today it got carried on my walk around the subdivision where I live. It's a Cimarron Pistolero .357 Colt SAA clone in a World War Supply canvas tanker holster that's actually intended for S&W Victory Models. It actually works well for the single action and the cartridge loops on the strap make it a nice grab-n-go setup.

It carried comfortably under my coat. Not how I'd normally carry concealed because of the slow draw, but it's not bad for a low threat environment, IMO.

Aside from the canvas holster I have this leather Tanker holster from El Paso Saddlery, built for a 4" S&W N-Frame. I bought it for my Model 28-2 but the Cimarron hogleg fits in it with about a half inch of barrel poking out the end.

You could add a belt slide with cartridge loops to the EPS rig and like the cheaper canvas holster, have a pretty good rig for fast grab-n-go.

Galco Draw-Ez for Holsters

Recently I've posted about M3 Tanker Holsters, of which I have three variants. The no-name copy that I wanted to use with my Beretta M9 was very snug, so I did a couple things to make it usable.

First, the leather was very dry, so I worked in some 100% neatsfoot oil. This softened it a bit and will preserve the leather. At some point I'll also rub some Sno-Seal dressing into the outside, to provide some water repellency.

After treating it with neatsfoot oil, I wrapped the Berretta in Saran wrap and forced it into the holster for about a week. This loosened it a little and the I added a plastic bag over the Saran wrap, then let it sit in the holster for another week or so. By this point it was getting there. However, the gun still dragged when drawing it.

So, the final step was to rub some Galco Draw-Ez Solution into the inside of the holster where the gun rubbed against it. I let it sit for about 10 minutes, put the naked gun back in, and tried drawing. It made a noticeable improvement.

Draw-Ez comes in 1/2 oz. (15ml) bottle. It's not cheap but a little goes a long way. If you have a leather holster that is hard to draw from it's worth trying.

The M3 "Tanker" Shoulder Holster

Sometime around 1939 - 1940, the US Army adopted a shoulder holster as an option for carrying the M1911A1 pistol. A similar version was adopted during WW2 for the S&W Victory Model and Colt Commando revolvers. These holsters remained in service at least until the 1990s, AFAIK. After the 1911 was replaced with the Beretta M9, it was used for the new pistol.

Several years ago I picked up a copy of the USGI M3 shoulder holster for the S&W Victory Model from the now-defunct Pacific Canvas and Leather. I like it a lot for carrying my Model 15 or Ruger Police Service Six, but of course it's too small for an N-Frame.

I recently replaced the grips on my S&W Model 28-2 Highway Patrolman, which made the gun much easier to shoot with my small hands. It previously wore a set of Herrett's Shooting Stars. I replaced them with a set of Thai Magnas + a BK Grips adapter. With it now fitting me better I started thinking about packing it as a woods gun.

So back on 9/3 I placed and order with El Paso Saddlery for one of their “1942 Tanker” holster, which is their version of the USGI M3 shoulder holster. It arrived 9/15, much sooner than expected based on what the EPS website says.

If it looks backwards it's because I'm a southpaw.

It’s very nicely made with nice leather, stitching, and hardware. They also threw in a key fob.

Out of curiosity I put my Colt Shooting Master in it and except for the fact that it’s too short for a 6” barrel, the holster fits the gun well. So, if I ever pick up a 4” Colt New Service this holster is usable with it.

A S&W Heavy Duty would look right in this rig.

I'm looking forward to using it in the woods.

I also have a copy of the M3 for 1911s. I don't have a 1911 anymore but I do have an M9, so tonight I tried it in the holster.

(I don't recall where I got this one from. Maybe Amazon. I'm pretty sure it was made in India.)

It's very snug and takes quite a bit of force to insert. So, since the leather was dry I gave it a good coat of neatsfoot oil and plan to leave the Beretta in it for several days in the hopes it'll stretch out.

As-is, my Browning High Power and Beretta 81 Cheetah fit OK. The CZ P-09 won't fit at all.

I've recently run across variants of the Tanker holster cut like the leather ones but made from canvas. The Amazon link above has some. I've never tried them and they are a bit less expensive, but I've no experience with them. They might work well, might not.

I also ran across this blog post extolling the merits of the M7 shoulder holster. The M7 differs from the M3 in that it includes a chest strap to help keep it from flopping around. That post also lists a variety of pistols that will fit, which makes it close to being a universal holster.

As to why to use one, as noted above I find it comfortable. It also makes the gun available if you're sitting in a vehicle. The strap can be adjusted so you can wear it over your clothes or concealed under a coat. Also, if you can't normally carry a gun but want one that you can quickly throw on, it's an option.

Adapting a US M1917 Holster to Fit Pietta Sheriff's Model Percussion Revolvers

On Blackie Thomas’s YouTube channel he shows carrying a Pietta NMA Sheriff’s Model in a replica holster for the US M1917 revolvers. He got his from Sportsman’s Guide. I bought this one from Sarco for $25 + tax and shipping. The quality seems pretty good — nice thick leather and good stitching. There’s no indicator where it was made but I have a feeling it’s from India.

As received, with a Pietta 1858 Sheriff's Model in it. The flap cannot be buttoned.

So, I added an extension by riveting on a piece of leather. I got the color to almost match just by applying some neatsfoot oil.

With the extension added:

It also fits my Pietta 1851 Navy Sheriff, maybe even a little better than the Remington.

I used a Tandy rivet setter and rivets to attach the extension, after punching holes using a hollow punch from a Harbor Freight set. I did not punch the hole for the button in the extension until the new piece of leather was attached to the holster flap. I did it afterwards, after marking the correct spot.

This will be a good option for field carry.

New Grips for the Ruger Police Service Six

I've had my Ruger Police Service Six for years. It came with Pachmayr Presentation grips that covered the backstrap. However, I have small hands so this made the trigger reach too long when the gun wasn't cocked. Since I almost always shoot double action, this was a problem.

I looked for a set of Pachmayr Grippers for the Ruger but struck out. The Service Six hasn't been made in over 30 years so that shouldn't be too much of a surprise. However, I was able to find an eBay seller with NOS Sile walnut target grips for the Security and Service Sixes. Score!

They needed a little minor fitting but it was nothing 5 minutes and a Dremel couldn't handle. They are very comfortable in my hands and allow me to get better trigger finger placement, since the backstrap is exposed.

I'd hoped to try out the gun with the new grips but the indoor range I go to with my dad was occupied with an event last night, and it was raining today so I didn't want to go to my outdoor club. I'm hoping to try it next weekend.

Speaking of which, I'm going camping next weekend so I'll be packing the Ruger in this, a replica of the WW2 USGI shoulder holster for S&W Victory Models as issued to Naval aviators. (Mine is for southpaws. AFAIK all original USGI holsters were right handed.) I got it from Pacific Canvas and Leather in their going out of business sale this past Summer. (They sold some cool stuff, I'm sad to see them go.)

The cartridge loops are very tight, so I'll be leaving the rounds in their so the canvas can stretch a little. They are my handloads consisting of a 178 grain Keith on top of 5.2 grains of Unique, in mixed nickeled cases. I'll also have a couple of Bianchi Speed Strips in my pocket with the same ammo.

Hill People Gear Kit Bag Loadout

A couple years ago I bought a Hill People Gear Original Kit Bag. This is the gear that lives in it 24x7. I use the bag on day hikes and overnighters. I have found the Kit Bag to be the most comfortable way to carry a pistol while hiking when carrying a pack. It also provides a very convenient and comfortable means of carrying a basic survival kit, and an easily accessible but secure way to carry my car keys and phone when off-pavement.

I augment the contents as dictated by the particular trip. E.g., add a Cliff bar or two.

Rear compartment:

• Smith & Wesson M&P Shield 9 with 8 round magazine
• One spare 8 round magazine, held in place with a Maxpedition Universal Holster

(The gun and spare magazine are loaded with Federal XM9001 9mm 115 grain JHP. In PA, I'm not worried about wild animals larger than dogs. The gun is there for defense against people. I've also carried a Beretta M9 and a CZ P-09 but switched to the Shield to reduce weight.)

Middle compartment:

• Princeton Tec Remix LED headlamp
• Adventure Medical Kits SOL Heatsheet survival blanket
• USGI olive drab triangular bandage, with edges hemmed to prevent fraying
• Safety pin on one of the sewn-in loops
• Woodsknife Reindeer Puukko knife in homemade LH sheath
• GI type match safe with strike-anywhere matches, and some sandpaper taped to the outside
• Three Esbit hexamine fuel tablets (Great fire starters.)
• BIC lighter in Exotac fireSLEEVE
• 0.5L Platypus water bag (Empty. Stole this idea from the Hill brothers.)
• Potable Aqua iodine-based water purification tablets

Outside compartment:

• Three AAA batteries in a small Ziploc bag
• Map of where I'm hiking
• Fox 40 micro whistle*
• REI zipper pull compass*
• Nitecore T0 flashlight* (This may get replaced with a single-AA Cree light, which has a button switch rather than a twist switch.)
• REI zipper pull thermometer*
• About ten feet of 550 cord

Items marked with an asterisk are dummy corded to light aluminum caribiners with bank line. I replaced the Slick Clips that came with the KB with the 'biners because they are easier for me to open and close.

Once I get to the trail, I'll stow my car keys and iPhone 6 in the outside compartment. Depending on the trip I may also bring a larger compass and a Garmin GPSMAP 62 GPS unit, but not necessarily in the KB.

Also, I removed the Grimlocks from the outside of the KB, since I don't use them.

Hill People Gear Kit Bag Review

Yesterday I took a vacation day and went for a hike in French Creek State Park in SE PA. It was my first chance to try out my new Hill People Gear Kit Bag. It’s a great option for carrying a handgun plus some basic survival gear out in the woods. I posted a full review over on Survival & Emergency Preparedness.

Aside from the Kit Bag review, I’ve also posted some pics from the hike in my gallery at Flintlock.org. Linky.