Alpineaire Black Bart Chili Review

Back in the fall I bought two packages of Alpineaire Black Bart Chili from Amazon Prime. Today I decided to try one for lunch.

To prepared it, pour two cups of boiling water into the bag, mix, and then let sit for 10 - 12 minutes. Then mix it again before eating.

I let it sit for at least 12 minutes, mixed it up, and it looked like this:

It came out a bit soupier than I'd like. The texture was typical for reconstituted freeze dried meals. It was fairly spicy.

Because it was so soupy, after I ate half I tried adding some parched corn flour to it to thicken it a bit. Not recommended. I didn't care for the resulting texture.

Overall, I'd recommend it and will probably buy some more for my camping/emergency prep food stash.

The Original Real Man's Coffee Cup

It is a USGI canteen cup made by Ingersoll Products sometime in the early 1970s. I got in around 1985 after I joined Civil Air Patrol. The outside is black from heating many meals in campfires.

American servicemen have been using canteen cups since the introduction of the M-1910 over a century ago. It's one of the best pieces of gear ever. The main thing it really needs is some kind of a lid. I have an older Heavy Cover brand stainless steel lid that I modified a bit to make it lighter, but for a couple decades I just relied on a piece of aluminum foil.

Newer USGI canteen cups have folding butterfly-style wire handles. I prefer the older L-style cups like this one. It's one feature of the Keith Titanium set that I would change. (OTH, the Keith sets come with a nice lid for the cup, so there's that.)

The horizontal slot in the handle is to allow you to put a fork from the M-1926 fork into it as an extension for when you're cooking on a fire. The vertical slot is to allow it to be slipped over the handle of the mess kit (AKA "meat can") so the whole ensemble can be dunked in boiling water for field sterilization.

Survival Resources has a nice article on useful mods to this style cup, including how to make a lid, adding D-rings to the handle so you can use a stick for an extension, and adding a bail. Check it out. (Incidentally, I recently ordered a few things from Survival Resources including a haversack. I plan to do a post and/or video on that as soon as I can get to it. No problems at all with my order and I got it quickly.)

Several New Posts at Survival Preps

I put up a couple new posts over on my Survival & Emergency Preparedness blog:

• Jämä Blanket Shirt from Varusteleka
• Cold Weather Camping and Equipment Failure

Check 'em out.

October 2018 Overnight Camping Trip

Day Camp and Gear Discussion Video

On Friday I took a day trip up to the Conrad Weiser State Forest near Port Clinton, PA. In the video I demonstrate making a poncho lean-to shelter, discuss knife selection, provide a brief overview of the Hill People Gear Recon Kit Bag and Tarahumara pack, and make some coffee in an Esbit cookset.

I am trying to make and post more videos to my YouTube channel as I have time. Please hit the Like button and subscribe.

Camping Trip AAR

This weekend a couple friends and I went on a camping trip to Tioga County, PA. The main activity this time was ham radio. We went up on Friday and came home today.

I had to work on Friday but was able to cut out a little early. By the time I got on the road it was rush hour, so it took me a full four hours to get to my friend's land. By the time I arrived it was 9:30 PM. Before I got there, he'd put up an 80M dipole antenna made from aluminum welding wire, electric fence insulators, and some electric fence posts from Tractor Supply. The feed line was the welding wire, formed into an open ladder line held apart with pink duct tape.

This dipole worked well and pulling in signals on 20M, 40M, and 80M. A number of the calls we logged were from within Pennsylvania, demonstrating the viability of NVIS communications.

We're fans of the digital modes. He has an Icom 718 with which he uses a Donner Digital Interface at home. Since he's not going to schlepp a desktop PC with him, he used PSKdroid running on an LG Android tablet, using audio coupling. I also setup my Apple iPad Mini 2 running PSKer to try and pull some signals from the aether.

We were able to copy quite a few transmissions even without a digital interface between the tablets and the rig. We probably would've copied some more, but for the bourbon. ;)

On Saturday I setup my portable vertical antenna, Yaesu FT-817ND, and iPad.

As you can see, we setup inside his 16' x 24' pavilion, which was a godsend this weekend due to the weather. It rained on and off all weekend. There was little to no wind, so the open ends weren't a problem. We even setup my tent underneath the roof so it stayed mostly dry.

As you can see, I have my antenna feedline connected via the FT-817ND's front, BNC connector. As I understand it, using this instead of the SO-239 on the back reduces power consumption.  Also note that the feedline is connected straight to the rig, with no tuner. The vertical is resonant on 20M. Using a resonant antenna instead of one connected through a tuner increases your effective radiated power, and when operating QRP, every little bit helps.

The iPad is connected to the rig with one of KF5INZ's Easy Digi interfaces.

Pic of my vertical antenna:

The objects to the right of the antenna are steel gong targets set out at about 25 yards.

I mostly operated PSK31 and using the antenna above was able to reach the west coast.

I grabbed the above from pskreporter.info using my iPhone. Later, my signal was also reported in Washington state, but I forgot to get a screen shot.

After doing PSK31 for awhile I changed over to WSPR, using iWSPR. This was my first time trying this digital mode and it's amazing. The signal reports below are after transmitting for awhile on 5 watts.

Numerous hits in Great Britain, Western Europe, and Germany. WSPR basically acts like a beacon, transmitting your callsign so that other hams with Internet-connected rigs can upload signal reports. With some creativity I think it could have other applications.

We took time off from the radio to have a nice lunch of venison sausage and onions, sauteed in a red wine reduction. Yeah, we eat good when we go camping.

Saturday night's dinner was venison chili washed down with Yuengling Lager or Guiness Stout.

I also took a break from radio in the afternoon to do a little shooting. I first shot my Cowboy Pimp Gun, AKA a Ruger Single Six in .32 H&R Magnum which has a color case hardened frame and faux ivory grips. It's a fun little blaster but needs a trigger job. I put a bunch of Prvi Partizan .32 S&W Longs through it, which made a nice little tink when they hit our steel gongs.

I also put 70 rounds of .44-40 through my Cimarron 1873 Sporting Rifle.

Fifty of those were black powder loads with 35 grains of Goex 3Fg under a bullet cast in my Accurate Molds 43-215C bullet mold, and they really smacked the gongs around. If you click on the picture to view the full sized version, you can see some smoke coming out of the rifle's ejection port. I was doing an 1870s-style mag dump. Off to the left, you can also see the gong that I just shot swinging from the impact.

After I finished shooting my other friend put up about 500 feet of aluminum welding wire in a loop, all around our campsite. We got back to radio after nightfall and the loop turned out to work well for receiving 80M and 160M, and they both wound up getting 160M phone QSOs. Because the antenna height ranged from only a couple feet to a max of 5 feet, they were NVIS to other hams in northern PA and southern NY.

Finally, I took this picture of my iPad which looked like it was detecting Space Invaders on the waterfall.

Even though the weather this weekend was crappy we had a great trip. We got some good field radio practice in, plus a bit of fun shooting.

Hill People Gear Kit Bag Loadout - Pictures

In my previous post (q.v.), I listed the contents of each pocket of my Hill People Gear Original Kit Bag. Since a picture is worth a thousand words, this post should be worth about 6,000 and change.

First, the zipped up Kit Bag and then the back compartment with my S&W M&P Shield 9 and a spare magazine. When worn, the pistol doesn't move at all, but I will probably buy a kydex holster that covers the trigger guard.

If you click on each pic you should get a full sized version.

Next we have the middle compartment with an assortment of survival gear.

Finally, the outer compartment with a few more items. This is where I stow my keys and iPhone. It provides easy access to the phone without having to worry about everything falling out when I'm consulting the phone's GPS.

Hill People Gear Kit Bag Loadout

A couple years ago I bought a Hill People Gear Original Kit Bag. This is the gear that lives in it 24x7. I use the bag on day hikes and overnighters. I have found the Kit Bag to be the most comfortable way to carry a pistol while hiking when carrying a pack. It also provides a very convenient and comfortable means of carrying a basic survival kit, and an easily accessible but secure way to carry my car keys and phone when off-pavement.

I augment the contents as dictated by the particular trip. E.g., add a Cliff bar or two.

Rear compartment:

• Smith & Wesson M&P Shield 9 with 8 round magazine
• One spare 8 round magazine, held in place with a Maxpedition Universal Holster

(The gun and spare magazine are loaded with Federal XM9001 9mm 115 grain JHP. In PA, I'm not worried about wild animals larger than dogs. The gun is there for defense against people. I've also carried a Beretta M9 and a CZ P-09 but switched to the Shield to reduce weight.)

Middle compartment:

• Princeton Tec Remix LED headlamp
• Adventure Medical Kits SOL Heatsheet survival blanket
• USGI olive drab triangular bandage, with edges hemmed to prevent fraying
• Safety pin on one of the sewn-in loops
• Woodsknife Reindeer Puukko knife in homemade LH sheath
• GI type match safe with strike-anywhere matches, and some sandpaper taped to the outside
• Three Esbit hexamine fuel tablets (Great fire starters.)
• BIC lighter in Exotac fireSLEEVE
• 0.5L Platypus water bag (Empty. Stole this idea from the Hill brothers.)
• Potable Aqua iodine-based water purification tablets

Outside compartment:

• Three AAA batteries in a small Ziploc bag
• Map of where I'm hiking
• Fox 40 micro whistle*
• REI zipper pull compass*
• Nitecore T0 flashlight* (This may get replaced with a single-AA Cree light, which has a button switch rather than a twist switch.)
• REI zipper pull thermometer*
• About ten feet of 550 cord

Items marked with an asterisk are dummy corded to light aluminum caribiners with bank line. I replaced the Slick Clips that came with the KB with the 'biners because they are easier for me to open and close.

Once I get to the trail, I'll stow my car keys and iPhone 6 in the outside compartment. Depending on the trip I may also bring a larger compass and a Garmin GPSMAP 62 GPS unit, but not necessarily in the KB.

Also, I removed the Grimlocks from the outside of the KB, since I don't use them.