Burned Some Charcoal Today

I'm off this week and made it to the range today with my GL Dech longrifle and my Cimarron 1860 Henry.

I've probably posted this picture before but what the heck.

The rifle started out as a left handed Dixie Gun Works Tennessee Mountain Rifle and then was redone as a Lancaster, Pennsylvania style rifle by George Dech. I bought it off the shelf at Dixon's about 10-1/2 years ago. Aside from the new wood and fittings, the barrel was turned to a half-round configuration, which makes it balance a lot better than a stock TMR.

My load today was 70 grains of Swiss 3Fg propelling a Hornady .480 roundball patched with pillow ticking, and lubed with mink oil tallow from Track of the Wolf. The .480 balls seat much easier than the more typical .490s and still provide minute-of-deer accuracy at 50 yards. AAMOF, I was able to shoot 10 shots without wiping and the smaller balls can be thumb seated. This will make reloading in the field much easier.

My flint broke on the first shot. My first inclination was to replace it but then it occurred to me that it would be interesting to see how it would work as-is. It turned out that I was able to fire nine more shots. All 10 shots went off quickly with no misfires or hangfires.

Now, generally speaking, I do not recommend shooting more than a few shots with a flint missing about 1/3 of it striking edge because it will lead to uneven frizzen wear. But I was curious to see how it would work and the experience reinforced my impression that the Miroku lock is really good.

I'll be replacing the flint tomorrow morning. I'm planning to go out for PA's late flintlock deer season in the afternoon with my brother.

After I cleaned up the smokepole, I put 50 rounds through my Cimarron Firearms 1860 Henry Rifle. They were my .44 Henry Flat-equivalent handholds of a cast 219 grain bullet, 28 grains of Goex 3Fg black powder, with 0.5cc of cornmeal as a spacer. Recoil in the nine pound Henry is about like a .22. (Full power loads with 35 grains recoil more but it's still pretty mild.)

I forgot to bring a .44 caliber cleaning jag with me to the range so I ran a couple wet patches through the bore using a slotted jag, to let it soak on my drive home. After getting home, only another 3 or 4 wet patches were required before they started coming out clean. Cleaning up after shooting black powder .44-40s in a rifle really is no big deal.

Camping Trip AAR

This weekend a couple friends and I went on a camping trip to Tioga County, PA. The main activity this time was ham radio. We went up on Friday and came home today.

I had to work on Friday but was able to cut out a little early. By the time I got on the road it was rush hour, so it took me a full four hours to get to my friend's land. By the time I arrived it was 9:30 PM. Before I got there, he'd put up an 80M dipole antenna made from aluminum welding wire, electric fence insulators, and some electric fence posts from Tractor Supply. The feed line was the welding wire, formed into an open ladder line held apart with pink duct tape.

This dipole worked well and pulling in signals on 20M, 40M, and 80M. A number of the calls we logged were from within Pennsylvania, demonstrating the viability of NVIS communications.

We're fans of the digital modes. He has an Icom 718 with which he uses a Donner Digital Interface at home. Since he's not going to schlepp a desktop PC with him, he used PSKdroid running on an LG Android tablet, using audio coupling. I also setup my Apple iPad Mini 2 running PSKer to try and pull some signals from the aether.

We were able to copy quite a few transmissions even without a digital interface between the tablets and the rig. We probably would've copied some more, but for the bourbon. ;)

On Saturday I setup my portable vertical antenna, Yaesu FT-817ND, and iPad.

As you can see, we setup inside his 16' x 24' pavilion, which was a godsend this weekend due to the weather. It rained on and off all weekend. There was little to no wind, so the open ends weren't a problem. We even setup my tent underneath the roof so it stayed mostly dry.

As you can see, I have my antenna feedline connected via the FT-817ND's front, BNC connector. As I understand it, using this instead of the SO-239 on the back reduces power consumption.  Also note that the feedline is connected straight to the rig, with no tuner. The vertical is resonant on 20M. Using a resonant antenna instead of one connected through a tuner increases your effective radiated power, and when operating QRP, every little bit helps.

The iPad is connected to the rig with one of KF5INZ's Easy Digi interfaces.

Pic of my vertical antenna:

The objects to the right of the antenna are steel gong targets set out at about 25 yards.

I mostly operated PSK31 and using the antenna above was able to reach the west coast.

I grabbed the above from pskreporter.info using my iPhone. Later, my signal was also reported in Washington state, but I forgot to get a screen shot.

After doing PSK31 for awhile I changed over to WSPR, using iWSPR. This was my first time trying this digital mode and it's amazing. The signal reports below are after transmitting for awhile on 5 watts.

Numerous hits in Great Britain, Western Europe, and Germany. WSPR basically acts like a beacon, transmitting your callsign so that other hams with Internet-connected rigs can upload signal reports. With some creativity I think it could have other applications.

We took time off from the radio to have a nice lunch of venison sausage and onions, sauteed in a red wine reduction. Yeah, we eat good when we go camping.

Saturday night's dinner was venison chili washed down with Yuengling Lager or Guiness Stout.

I also took a break from radio in the afternoon to do a little shooting. I first shot my Cowboy Pimp Gun, AKA a Ruger Single Six in .32 H&R Magnum which has a color case hardened frame and faux ivory grips. It's a fun little blaster but needs a trigger job. I put a bunch of Prvi Partizan .32 S&W Longs through it, which made a nice little tink when they hit our steel gongs.

I also put 70 rounds of .44-40 through my Cimarron 1873 Sporting Rifle.

Fifty of those were black powder loads with 35 grains of Goex 3Fg under a bullet cast in my Accurate Molds 43-215C bullet mold, and they really smacked the gongs around. If you click on the picture to view the full sized version, you can see some smoke coming out of the rifle's ejection port. I was doing an 1870s-style mag dump. Off to the left, you can also see the gong that I just shot swinging from the impact.

After I finished shooting my other friend put up about 500 feet of aluminum welding wire in a loop, all around our campsite. We got back to radio after nightfall and the loop turned out to work well for receiving 80M and 160M, and they both wound up getting 160M phone QSOs. Because the antenna height ranged from only a couple feet to a max of 5 feet, they were NVIS to other hams in northern PA and southern NY.

Finally, I took this picture of my iPad which looked like it was detecting Space Invaders on the waterfall.

Even though the weather this weekend was crappy we had a great trip. We got some good field radio practice in, plus a bit of fun shooting.

Loaded Black Powder .44-40s With Accurate Molds 43-215C Bullets

Yesterday I cast some more bullets in the Accurate Molds 43-215C mold, and then lubed and sized them. I'm pan lubing them with a homebrew mix of beeswax, mutton tallow, and a little paraffin wax. Here's my setup:

On the left is a hot plate with a tin in which I mix the lube. On the sheet of foil is my lube pan: a tin from a some kippered herring. To the right of that is the lid for the mixing tin on which is a .44-40 case that I drilled out the flash hole, which I use to cut the lubed bullets from the hardened lube. I push the bullets out of the case with a 9/64" Allen wrench.

After I cut a batch of bullets from the lube I put another batch in the holes left behind, then reheat the lube pan on the hot plate, then take it off to cool and harden. Like so:

I can fit twenty-two .44 caliber bullets in this pan, so the next time I eat a can of kippered herring I'll save its tin, so I can speed things up. Here's a closeup of an unlubed and a lubed bullet:

I wound up with around 120 bullets lubed and sized when I wrapped up last night.

Tonight, I loaded up two boxes of ammo: 50 rounds each using Swiss 3Fg and Goex 3Fg; 2.2cc of powder for both, which is about 35 grains.

I should get the chance to try them out next weekend on a camping trip.