How to Make a Finishing Paddle.
Coincidentally, yesterday I put together my first stropping block/finishing paddle with a piece of leather glued to a piece of wood. Even though I've been sharpening knives for close to four decades, I only started using a strop in the last couple of weeks. I immediately noticed a difference in my knife edges.
That's been a real oversight on my part, because a strop can help you get a really sharp edge on a knife, and polish the bevel, which has a couple benefits. First, it reduces drag in the cut, and second, it makes the edge a little more corrosion-resistant because the smooth surface is less prone to retaining moisture.
Some pictures. First, the stropping block before I applied any compound.
Second, after applying the green compound from Eastwood. As you can see, it didn't go on evenly. I should probably have sanded the block to ensure it was as level as possible, and then sanded the leather also. Oh well, it's a learning process.
Finally, what it looks like after a little use. The dark spots are where it removed metal from the knife.
It may not look like much but it helped get a few of my knives really sharp. E.g., my Cold Steel Bushman feels like a razor now.
I made this one from some cowhide I had laying around that was about 1/8" thick, and a piece of a scrap 2x4. The thick base helps provide clearance so you don't hit your knuckles on your workbench.
I may go back and tweak it by scraping off most of the compound, adding some mineral oil to the leather, slightly roughing the leather so it takes the compound better, and then reapplying the compound.
My brother requested that I make him one and I'll use the lessons learned with this one in doing so.
If you don't have the materials for making one yourself laying around like I did, and want to try using a stropping block, you can get one off Amazon, here.
Posts
No comments:
Post a Comment