Winchester 244 in .44-40 WCF

A few years ago when reloading components were hard to come by, one of the powders that was seen relatively frequently on the shelf was Winchester 244, which is just ahead of Alliant Unique on Hodgdon's burn rate chart. When searching for loading data for Win-244 a common theme is that there is not much to be found.

I picked up a pound in 2024 and loaded a box of .38 Special 158 grain LSWCs but didn't do much with it. I mostly use Bullesye, Titegroup, and HP-38 in .38 Special, with some Unique thrown in for variety.

One thing I like about 244 is that like the other ball powders it meters consistently, so I wanted to find a use for it.

Another cartridge I load for is .44-40 WCF, which I shoot in a Cimarron Model P revolver, a Cimarron 1860 Henry rifle, and a Cimarron 1873 Sporting Rifle (all built by Uberti). Loaddata.com has data for Winchester 244 in .44-40, with 200 grain bullets ranging from 6.8 grains to 7.6 grains, and for 223 grain bullets from 6.5 to 7.4 grains, so today I decided to load some up.

Muzzle velocities for these loads range from around 928 FPS to a bit over 1,000 FPS from a 7" Colt Frontier Six Shooter, according to Loaddata.com. That's in the ballpark of what .44-40 will do with full charges of high quality black powder, e.g., Swiss.

I loaded 50 with a 200 grain RNFP from Desperado Cowboy Bullets and 50 with a 215 grain RNFP from Matt's Bullets, both over 7.0 grains of 244, which I dispensed using the No.9 rotor in my RCBS Little Dandy.

Performance of this should be similar to the Skeeter Load of a 250 grain Keith bullet over 7.5 grains of Unique in .44 Special, albeit with lighter bullets.

I'm hoping to try them out next weekend.

NOTE: Make sure you verify the load data before relying upon it, and if you use a Little Dandy do not rely on what my measure throws. Verify that yourself with a scale and your powder measure.